 |
|
|
|
Direct Drive won 1st an 2nd place in the
drag races and 1st place in the motorcross
with the shops rzr's at the Oregon Sandfest
2009.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BILLET ALUMINUM FRONT
DIFFERENTIAL(sprague)
CAGE.$149.00
|
|
These are available as a complete unit with spring clips and bearings.
It is not always necessary to replace the clips and bearings.
Please call with additional questions.
|
|
|
|
|
|
|
|
These new cages are a direct replacement for the weak factory plastic unit.The factory
cages are very prone to breakage. When this happens you will not only have a ride cut
short,or be stranded in the middle of nowhere, but as the factory cage breaks it may
also damage the spring clips and the armature plate. Resulting in additional costs to
replace these parts.
*MACHINED FROM 7075 ALUMINUM.
*NEARLY TWICE THE STRENGTH OF 6061.
*AN EXCLUSIVE Direct Drive DESIGN THAT CONTRIBUTES TO THE INCREASE IN
STRENGTH.
*HARD COATED FOR ADDITIONAL WEAR RESISTANCE.
***SHIP YOUR FRONT DIFFERENTIAL TO US-
WE WILL INSTALL THE CAGE AT NO CHARGE***
*Available as a complete unit with new spring clips and rollers.
Replace your cage before a riding trip is lost to a broken factory plastic unit.
|
|
|
|
|
|
|
|
New! Billet aluminum off road permit plate
for the Polaris RZR XP 900
$34.95
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pinion Caps
Billet Aluminum (6061) $40
|
|
|
|
The pinion cap bolts to the front differential at the point where the front drive line
enters the front differential . The factory piece is cast aluminum and can be prone
to failure. If this occurs the fluid will leak out of the front differential. Our pinion
caps are machined out of solid aluminum and are significantly stronger, includes
a new installed Seal if you are already installing a diff cage, this is the perfect
time to replace the stock cast piece and give yourself that extra piece of mind.
|
|
|
|
|
|
|
|
|
RZR XP Rear Frame Brace
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shift Levers-$110.00
|
|
|
|
Part numbers
RSL - R (for RED)
RSL - Y (for yellow)
RSL - O (for orange)
RSL - B (for blue)
RSL - BLk (for black anodized aluminum)
RSL - NG (for no grips just polished )
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro Armor
Aluminum Doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
$510.00
_____________________
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HID lights/factory
replacements $130
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rigid LED light bars
Available in lengths from 4inch long to 50inch long.
Custom reflector configurations available.If you want
the most amazing night riding experience, then these
light bars are the only way to go.Patented hybrid
reflector system that makes these the
brightest,most efficient light on the market.The
greatest lumen output per watt available.
*93% efficient versus brand x.
*Available in spot,flood and combinations
*More light with less power.
*50,000 hour life.
*Very high lumen's per watt.
*No glass lens to break.
*No bulbs to burn out.
*No ballast to mount.
*No hot spots or shadows.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These shift levers are a complete replacement for the
stock lever.they do not mount to the factory steel
shaft.They are comprised of three pieces,the main body
and left and right bolt on grips.the grips bolt on with
stainless allen flat bolts.The main body is polished
aluminum and the grips are available in many different
colors. As well as an anodized black aluminum that is
contrast machined to really stand out.
The colored grips are machined out of a transparent
acrylic plastic.When the main shafts are machined we
pocket them where the grips are attached,This provides
for an amazing affect when the transparent grips are
used ,since you are able to see through the grips to the
machined main shaft underneath.The grip colors that are
available are all transparent - Red - Blue - Yellow - Orange
and an anodized black aluminum that is contrast
machined.
Stock on left / HID on right
These doors are lightweight aluminum
with a slight kick out for additional
shoulder clearance.No rattle design.
A positive latch system and open suicide
that makes them easy to open and close
without having to reach backward to
access the latch.Available in solid,solid
with cutouts and with nets.Also brushed
or black finish.
BILLET PARTS
These HID kits are 100% plug and play using
OEM connectors for quick & easy installation.
These use aircraft digital ballasts for low start
up draw and almost no RFI emmisions
ensuring crystal clear stereos and
communication radios.
10 inch $325.00
20 inch $578.99
30 inch $799.99
40 inch $1,099.99
Spot / flood
More flood
*Machined out of billet aluminum.
*A machined pocket for the permit.
*Anodized.
*Fills the void in the rear body and also
follows the contour of the body.
A great way to finish off the rear of the
body while providing a clean and visible
spot to attach your off road permit.
No longer will you have to worry about
your permit becoming detached from the
plastic.
Why spend High dollar on your new xp just
to make it look low dollar by slapping a
permit on the plastic.
Design 1
Design 2
Design 3
* New aggressive design.
* Provides protection for the ends of the radius rods(the factory design leaves this
area exposed to damage).
* Anodized for great looks and corrosion resistance.
* Easy access to the oil fill plug while still hiding the rear differential from view.
* Machined out of 6061 aluminum,creating a strong yet light weight brace.
|
Stock
After
