hondalocko




				Honda 250R Pro Series lockouts are only available through Direct Drive and authorized dealers.

				Pro series lockouts are engineered with two pivot pin lock down bolts to improve reliability, Pivot pin lock down bolts are placed as close to the center ID for less rotating mass. All new lightweight billet aluminum lockout body. PATENT PENDING

	Honda Pro Series Lockout PATENT PENDING
				When you give your bike the gas, your clutch, new or used, is going to slip excessively. The lockout will eliminate this slipping and in the process transfer all of the engines horsepower to the rear wheels instead of it being lost through a slipping clutch. The lockout will also extend the life of the clutch. The use of the lockout will also allow you to set-up the clutch to operate as a two stage clutch.the goal for the clutch is to have a small amount of slippage off the line then lockup in the taller gears.this set-up will help keep the rpm's of the engine up and eliminate some whheel spin


				All Direct Drive Pro Series Lockouts come fully assembled and ready to bolt on. The only parts you need to remove or replace are the stock clutch bolts. Simply hold the lockout with all five fingers inward and fasten down with the five allen cap screws provided and torque down to factory specifications, Make sure ALL five weighted fingers move freely and are not bound up by the pressure plate once all five bolts are tightened down and the weighted fingers move freely your finished installing your Honda 250R Pro Series Lockout.

~trx250R Pro Series Lockout ~ | ~PATENT PENDING~

Lifetime Warranty

These quality TRX250R Pro Series Lockouts are fully guaranteed against defects in
material or workmanship. Direct Drive will repair or replace at our option, if the
product is proved defective in material or workmanship. During the lifetime of the
product. Normal wear, Abuse, Improper care or Negligence are not and will not be
covered under this warranty. ~
Direct Drive

trx 250R Clutch Lockout

The best choice for complete and easy clutch tuning, and the elimination of excessive
clutch slippage.